Ring Sizing Guide
Because every beautiful story deserves the right fit.
Complimentary Ring Sizing
We want your new ring to fit beautifully from the moment you receive it. Complimentary ring sizing is available, so we encourage you to contact us before purchasing. We’ll be happy to help confirm your ring size and advise whether the piece you have chosen can be safely resized.
As a general guide, most of our rings can be resized up to three sizes larger or smaller, although this will depend on the individual design, setting and gemstones.
Please ensure you know your correct ring size before completing your purchase. We are unable to accept returns due to an incorrect ring size once a ring has been purchased.
If you’re unsure of your size, simply contact us before ordering. We’re always happy to help you find the perfect fit.
Simple ways to find your size at home
Option 1. Measure an existing ring
Use a ring that already fits the finger you’re buying for.
- Place the ring on a flat surface.
- Measure the inner diameter, inside edge to inside edge, in millimetres.
- Match your measurement to the chart below.
Option 2. Measure your finger
Use a strip of paper or a piece of string.
- Wrap the paper or string around your finger, not too tight.
- Mark where the ends meet.
- Lay it flat and measure the length in millimetres.
- Match that measurement, the circumference, to the chart below.
Tip: measure at the end of the day when your fingers are naturally a little larger, and avoid measuring when your hands are cold.
Option 3. Print our size circles
For the most accurate result, print our sizing guide at 100% (actual size). Before you measure, check the print scaled correctly: the test line on the printed guide should measure exactly 50 mm. Then find the circle that matches your ring’s inner diameter, or cut the circles out and try them on your finger.
Print the full sizing guide
Open the printable ring sizing guide
Before you print: turn off “fit to page” or “scale to fit” in your printer settings and print at 100%. Then measure the test line on the printed sheet. If it reads 50 mm, your size circles are accurate.
Australian ring size chart
Measurements are approximate.
| Australian size | Inner diameter (mm) | Finger circumference (mm) |
|---|---|---|
| F | 14.1 | 44.2 |
| G | 14.5 | 45.5 |
| H | 14.9 | 46.8 |
| I | 15.3 | 48.0 |
| J | 15.7 | 49.3 |
| K | 16.1 | 50.6 |
| L | 16.5 | 51.9 |
| M | 16.9 | 53.1 |
| N | 17.3 | 54.4 |
| O | 17.7 | 55.7 |
| P | 18.1 | 57.0 |
| Q | 18.5 | 58.3 |
| R | 18.9 | 59.5 |
| S | 19.4 | 60.8 |
| T | 19.8 | 62.1 |
| U | 20.2 | 63.4 |
| V | 20.6 | 64.6 |
Still unsure?
We’re here to help. Contact us and we’ll be delighted to guide you, and we can talk you through your size before you order.
The perfect fit for a brighter tomorrow.
Dean G Premium Cut Opals